T600-4 600 Watt 4-Channel Amplifier
The T600-4 amplifier offers the perfect balance of power output and compact design required for high performance audio systems. The 4-channel configuration allows fine tuning adjustments between front stage component systems and rear surround speakers. The built-in crossover also allows the rear channels to be configured for running one or two subwoofers.
2/4 channel switch
24dB/octave crossover
4 Gauge power/ground terminals
Audiophile grade speaker connections
MOSFET output stage
MOSFET power supply
RCA pass-thru
Number of Channels
4
Rated Power
continuous power
100W x 4 @ 4-Ohms RMS
150W x 4 @ 2-Ohms RMS
300W x 2 @ 4-Ohms bridged RMS
2-Ohms x 2 bridged Stable
Total Power
total sum of 'rated power'
600 Watts
Dynamic Power
powercube measurement (
info)
Front Channels
139 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res
Rear Channels
140 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res
Bridgeable
Yes
Efficiency (average)
70% @ 4-Ohm
64% @ 2-Ohm
Crossover Controls
Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Tone Controls
Front Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Signal Input
Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Signal Output
Low Level: 1 RCA pair
Power Input Connector
Block
Power Wire Gauge
4 AWG
Speaker Output Connector
Screw terminal barrier strip
Speaker Wire Gauge
8 AWG to 18 AWG
Heat Sink Type
Cast aluminum
Cooling
Convection
Remote Controls
Optional Remote Punch EQ
(overrides rear channel built-in Punch EQ)
Visual Indicators
Power
Thermal
Protect
Circuit Topology Class
Class A/B
Frequency Response
20Hz to 20kHz +/- 1dB
Shipping Weight
12.00 Lbs.
(5.44 Kg.)
Dimensions (HxWxL)
2.14 x 8.14 x 14.91 (in)
5.42 x 20.68 x 37.86 (cm)